Engineer ammunition

Engineer ammunition

Demolition blocks / Pressed charge

Average density 1,49 - 1,59 g/cm3
Detonating velocity approx. 6800 m/s
Volume of explosives approx. 740 dm3/kg
Sensitivity to friction > 353 N
Sensitivity to impact 14,7 J
Thermal stability 48 h in temp. 75 °C
Sensitivity to initiate Detonation from an electric or non – electric detonator any type
Scope of using
  • temp. - 40°C do + 50°C
  • can be used under water

Technical specification

Pressed charge 75g Ø 30, h = 70
Cuboid with a hole Ø 8 mm and 34 mm or 50 mm deep
Paper envelope double coated with paraffin
Pressed charge 200g a = 100, b = 25, h = 50
Cuboid with a hole Ø 8 mm and 34 mm or 50 mm deep
paper envelope double coated with paraffin

Cast charges

Cast charge 400g a = 100, b = 50, h = 50
Cuboid with detonator 44g
Paper envelope double coated with paraffin and with printed inscription
Cast charge 1kg a = 128, b = 50, h = 100
Cuboid with detonator 44g
Paper envelope double coated with paraffin and with printed inscription
Cast charge 2,5kg Ø 140 h = 140
Cylinder with 2 detonators 200g
Cardboard tube covered with paraffin
Cast charge 3,8kg a = 265, b = 75, h = 127
Cuboid with 2 detonators 44g
Paper envelope double coated with paraffin and with printed inscription
Cast charge 5kg Ø 140, h = 220
Cylinder with 2 detonators 200g
Paper envelope double coated with paraffin and with printed inscription y
Cast charge 5,5kg Ø 140, h = 280
Cylinder with 2 detonators 200g
Cardboard tube covered with paraffiny
Cast charge 8kg Ø 140, h = 340
Cylinder with 2 detonators 200g
Paper envelope double coated with paraffin and with printed inscription
Cast charge 25kg Ø 280, h = 280
Cylinder with 2 detonators 200g
Outer layer painted in red
Cast charge 25kg a = 260, b = 240, h = 270
Cuboid with 2 detonators 500g
Outer layer painted in red 
Cast charge 100kg Ø 450, h = 450
Cylinder with 1 detonators 500g
Outer layer painted in red 
Cast charge 250kg Ø 610, h = 596
Cylinder with 1 detonators 500g
Outer layer painted in red 

Apart from the data listed higher up, it is a possibility to make charges in other weights and dimensions according to customer’s requirements